Ever asked yourself ” Why Is My Brita Filter Flashing Red After Filter Change. What Is The Issue”? When was the last time you actually changed the filter?
Your Brita filter might flash red after a filter change due to improper seating or trapped air affecting water flow. Confirm the filter is snugly inserted in the reservoir. Check if air is trapped by running water until it’s steady. Press and hold the reset button to see if it resolves the issue. Make sure the filter type matches your Brita system to prevent misalignment problems. If these steps don’t help, the filter or indicator may be malfunctioning. Persistent red light signals you might need further troubleshooting steps or professional help to verify your system functions properly.
- WATER FILTER: Eight Brita Standard Water Filters that offer great-tasting, healthier drinking water when used in Brita systems, like a filtered water pitcher or dispenser
- CUTS OUT IMPURITIES: Brita replacement water filter cuts the taste and odor of chlorine and also reduces copper, cadmium and mercury impurities without leaving black flecks behind
- SUSTAINABLE: By switching to Brita, you can save money and replace up to 1,800 standard 16.9-oz. single-use plastic water bottles each year
- CONVENIENT DESIGN: Filter requires no presoak and installs quickly and easily into a Brita filter water pitcher or dispenser
- DURATION: One filter lasts up to two months or 40 gallons
Possible Causes of Red Light
If your Brita filter’s red light is flashing, it usually points to an issue with the installation. The red light often signals that the filter isn’t seated properly, which can lead to air being trapped in the system and reduced water flow.
Start by verifying the filter is correctly aligned and seated in the reservoir. Improper seating can cause the red light to activate, alerting you to this common installation error.
Once you’ve checked the seating, try pressing and holding the reset button until the green light blinks. This action resets the system and might resolve the issue if the filter replacement was successful, but the system simply needs a reset.
If the red light persists, consider the possibility of a malfunctioning filter. Even new filters can occasionally be defective, and reverting to the old filter can help determine if the new one is at fault.
If troubleshooting these steps doesn’t stop the red light from flashing, the issue might lie with the filter indicator itself. In such cases, further inspection or contacting customer support might be necessary to verify your Brita system operates smoothly.
Proper Filter Installation Steps
Attention to detail is vital when installing your Brita filter to guarantee peak performance and water quality.
Start by washing your hands to maintain cleanliness during the installation process. If you’re using a Standard filter, rinse it under cold water for 15 seconds. The Elite™ filter doesn’t need rinsing. Proper alignment is essential—insert the filter into the reservoir, making sure it’s snug and secure. This tight seal prevents leaks and guarantees your filter works efficiently.
Once the filter’s in place, fill the reservoir with cold tap water. Discard the first three pitchers of filtered water. This step is necessary to activate the filter properly, making sure any initial carbon dust is flushed out and the filter is ready to provide you with clean water.
After completing the installation, don’t forget to press and hold the reset button on the pitcher. This activates the electronic filter indicator, allowing you to track the filter’s life and know exactly when it’s time for a replacement.
- Get cleaner*, great-tasting, water without the waste with Brita Elite water filter replacements; you can save money and replace 1,800 single-use plastic water bottles per year; Packaging may vary
- Reduces 99% of lead, filters Chlorine (taste and odor), Cadmium, Mercury, Benzene, Asbestos, and more; Brita Elite filters out more than 3x the contaminants vs. standard Brita filters*
- The Brita Elite lasts 3x longer than Pur filters and 6x longer than standard ZeroWater filters; only replace the Brita Elite water filter 2x a year, about 6 months**
- Compatible with all Brita pitchers and dispensers except Stream; just insert filter into reservoir, line up pitcher notch with filter groove, press firmly to ensure tight seal
- Blue in color and made without BPA, Brita Elite filters feature a pull-top cap for easy removal and with no presoaking, filter installation is fast and simple
How to Expel Trapped Air
Once you’ve confirmed the filter is properly installed, you might still face issues with air trapped in the system. This can cause your Brita filter to flash red, signaling that the water flow isn’t ideal.
To fix this, start by placing a glass under the dispenser to catch any water that might spill out. Hold your Brita pitcher or dispenser upright and let the water run. It may take a few minutes, but keep it going until you achieve a steady flow. This process helps push out any trapped air, restoring the system to its normal flow rate.
Running at least one gallon of water through the dispenser is a good rule of thumb. It clears out air pockets that might be causing the flashing red light.
If the water flow remains reduced, try removing and reinserting the filter to verify it’s seated correctly in its housing. Sometimes a simple adjustment can make a big difference.
If you have a bypass cap, use it to determine if the problem is with the filter itself or elsewhere in the system. Following these steps should help resolve issues related to trapped air after a filter change.
Troubleshooting New Filter Issues
Have you ever installed a new Brita filter only to find it flashing red? It can be frustrating, but let’s troubleshoot this issue together.
First, check if the filter is properly seated in the reservoir. A loose fit may be causing the filter indicator’s red light to flash. Remove the filter and reinsert it, ensuring a snug connection.
If the red light persists, air trapped in the system might be the culprit. Run at least one gallon of water through the dispenser to expel any air pockets. This step often resolves flow issues and gets your filter working effectively again.
Another possibility is that the filter type mightn’t be compatible with your Brita system. Double-check that you’re using the correct filter model, as an incompatible filter could lead to the red light issue.
Don’t forget about the reset button on your filter indicator. Press and hold it to see if the indicator responds.
If it continues to flash red despite these efforts, there might be a malfunction rather than a need for a new filter. Regularly monitor your filter installation to prevent such issues.
When to Contact Customer Support
If you’ve tried troubleshooting but your Brita filter’s red light still flashes, it might be time to contact customer support. You’ve confirmed the filter installation is correct, expelled any trapped air, and even swapped back to your old filter. Yet, the persistent red light signals that something’s amiss, potentially indicating a malfunction.
Start by attempting to reset the filter indicator by pressing the STATUS button. If multiple attempts fail and the red light remains, it’s a clear sign that professional assistance is needed. The issue might be more complex than a simple installation error, suggesting a deeper problem with the system or the new filter itself.
Contact customer support immediately if the red light appears right after a new filter installation. This could mean there’s an inherent issue with the filter that needs addressing.
Additionally, if you’re still concerned about water quality or flow post-installation, reaching out for help is wise. Customer support can diagnose potential underlying problems and guide you through resolving them.
Don’t hesitate to seek their assistance; they can provide the necessary expertise to guarantee your Brita filter functions effectively.
Frequently Asked Questions
Why Is My Brita Still Red After Replacing the Filter?
Your Brita’s still red because the new filter might not be seated properly. Check its alignment and push it firmly. If that doesn’t work, hold the reset button or run water to expel trapped air.
How Do I Reset the Red Light on My Brita Filter?
Imagine your Brita filter as a stubborn traffic light. To reset that red signal, press and hold the RESET button until it flashes green. This figurative switch lets the filter know it’s ready for smooth, fresh flow.
Why Is My Brita Stream Flashing Red?
Your Brita Stream flashes red because the filter might not be installed correctly, or air is trapped in the system. Make sure it’s aligned and seated properly. Run water through to remove air and reset the indicator.
Why Is My Pur Filter Still Blinking Red After Changing Filter?
Oh, the red blinking light—your filter’s way of saying, “Not today!” Double-check you’ve seated it correctly. Make sure air isn’t playing hide and seek. If stubborn, consult the manual or revert to the old filter.